Bandsaege Gehrung 280 x 180 mm
Pilous
ARG 235 Plus
Bandsaege Gehrung 280 x 180 mm
Pilous
ARG 235 Plus
Baujahr
2020
Angebotstyp
Gebraucht
Standort
Transito 21, 6909 DA Babberich, NL
DATEN ZUR MASCHINE
- Maschinentyp:
- Bandsaege Gehrung 280 x 180 mm
- Hersteller:
- Pilous
- Modell:
- ARG 235 Plus
- Baujahr:
- 2020
- Zustand:
- sehr gut (gebraucht)
PREIS UND STANDORT
DETAILS ZUM ANGEBOT
- Inserat-ID:
- A582-6471
- Referenznummer:
- 6222
- Aktualisierung:
- zuletzt am 13.05.2022
BESCHREIBUNG
Capacity 90°: 235°
Cutting flat 90°: 280 x 180 mm
Capacity L 45°: 185°
Capacity R 45°: 115°
Cutting speed Vario:40 + 80 m/min.
Circle blade size: 2710 x 27 x 0,9 mm
Power: 1,5 kW
Length: 1.930 mm
Pc9rh
Width: 1.610 mm
Height: 2.000 mm
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Share on
Cutting flat 90°: 280 x 180 mm
Capacity L 45°: 185°
Capacity R 45°: 115°
Cutting speed Vario:40 + 80 m/min.
Circle blade size: 2710 x 27 x 0,9 mm
Power: 1,5 kW
Length: 1.930 mm
Pc9rh
Width: 1.610 mm
Height: 2.000 mm
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Share on
ANBIETER
MACH4METAL
Ansprechpartner: Herr MACH4METAL MACH4METAL
Transito 21
6909 DA Babberich, Niederlande

Mach4Metal, spezialisiert in Großmaschinen Zerspanung - und Blechbearbeitungsmaschinen kauft und verkauft gebrauchte Metallbearbeitungsmaschinen wie Abkantpressen, Blechscheren, Schwenkbiegen, Laserscheidanlagen, Drehmaschinen, Drehbänke, Fräsmaschinen, Portalmaschinen, Schleifmaschinen, Bohrwerke, Eckold Kraftformer. Auf unserer Internetseite finden Sie mehr Informationen über uns und unsere Maschinen. Wir haben viele Maschinen wie Skoda Drehmaschinen, Bohrwerke, Eckold Fraftformers, Deckel Maschinen, Mazak CNC Maschinen, Trumpf Abkantpressen, Amada Laser sowie Blechrundbiegen von Häusler, Davi, Stölting auf Lager . Auch konventionele Drehmaschinen von Weiler, VDF Boehringer DUE, Heyligenstaedt, Wohlenberg finden Sie bei uns. Wir haben duchgehend eine große Auswahl von T-Nuten Aufspannplatten auf Lager.
Auf unserer Webseite finden Sie unseren aktuellen Lagerbestand
Mach4metal B.V.
Auf unserer Webseite finden Sie unseren aktuellen Lagerbestand
Mach4metal B.V.
Weitere rechtliche Angaben
Article 1 Definitions
The terms used in these general terms and conditions are defined as follows:
General Terms and Conditions: the Terms and Conditions listed below
Seller: MACH 4 METAL B.V.
Buyer: Any natural or legal person who purchases Products from Seller, or with whom Seller enters into an Agreement, or with whom Seller is currently negotiating in order to enter into an Agreement.
Products: All goods Seller will supply or has supplied pursuant to the Agreement.
Quotation: The offer made by Seller.
Agreement: Any Agreement with regard to the sales and delivery of Products by Seller, any supplement or alteration to said contract, as well as all legal acts in the preparation or for the execution of the Agreement.
Parties: Seller and Buyer are jointly referred to as the Parties.
Article 2 Applicability
1. These General Terms and Conditions apply to all (price) Quotations Seller makes and all Agreements between Parties.
2. Seller explicitly rejects all alterations and/or additions to these General Terms and Conditions, unless they were validated and accepted in writing. Furthermore, Seller explicitly rejects the applicability of Buyer’s Sales Conditions and/or general terms and conditions, unless these were validated and accepted in writing.
3. Should one or multiple provisions, or parts thereof, as recorded in these General Terms and Conditions be nullified or be determined to be invalid in any other way, this will not affect the validity of the other general terms and conditions. In that event Buyer is obligated to agree to one or multiple substitute stipulations, which will resemble the original provision(s) as closely as possible in both purpose and tenor.
Article 3 Establishment of the Agreement
1. Any Quotations and (price) tenders made by Seller shall remain free of engagement. Seller may revoke its Quotations at all times, even when a fixed acceptance term is listed in the Quotation. Buyer’s request for a Quotation or the placement of an order without prior Quotation, will be regarded a request for the production of a Quotation.
2. Data as well as information which are included in Quotations, images, catalogues, technical drawings, advice, and any other provided - subsequent - information, explicitly do not bind Seller.
3. All intellectual property rights with regards to the drawings and/or images presented as part of the offer, rest with Seller. Buyer is not allowed to multiply, publicise or copy any images or drawings without prior written permission.
4. Agreements are established by either an order confirmation or an invoice (should this precede the order confirmation) sent by Seller to Buyer.
Article 4 Prices
1. Prices are expressed in Euros and are, unless otherwise specified, exclusive of VAT, other taxes or surcharges, packing/packaging, and transport costs, as it is where it is.
2. Should one or more of the cost factors be altered after the date of the Quotation but before delivery, Seller is entitled to adjust the agreed on price accordingly, this also applies to binding quotations.
Article 5 Payment
1. Payment shall be made within 48 hours after the invoice date, unless otherwise agreed in writing. Payment should be effectively made in the agreed upon currency. Buyer cannot claim settlement and/or deferment.
2. Prior to the observance of its obligations pursuant to the Agreement, Seller is entitled to request proper security to support Buyer’s payment obligations. Buyer’s refusal to provide the requested security entitles Seller to annul the Agreement(s) in writing or - as is its prerogative- to suspend its obligations.
3. Should Buyer not make payment within the agreed on term, he is deemed to be in immediate default which entitles Seller to increase the amount due with either a default interest of 5% per month or the statutory commercial interest rate under article 6:119a BW (Dutch Civil Code), starting on the invoice date (a part of the month counting as a whole), of the gross invoice amount up until the time of full payment.
4. Should Buyer not meet its (payment)obligations, he is obligated to reimburse all (collecting)fees to Seller.
5. In contravention to paragraph 1, payment will be immediately due when the agreed on price (or part thereof) is not paid promptly, when Buyer is in a state of bankruptcy or equal circumstances, requests moratorium, when legal restraint or administration is requested, or when any attachment is placed on Buyer’s property or receivables.
Article 6 - Delivery
1. The delivery period provided by Seller is indicative only. The exceeding of the delivery period will not lead to Seller’s liability without factual proof of default.
2. Delivery of the Products will be made, unless otherwise agreed, ex works. The Products are deemed to be delivered once they have been offered by Seller to Buyer at the agreed on time and location for the first time.
3. Buyer is obligated to take possession of the Products on the agreed on time and place. Any transportation, storage or additional costs relating to Buyer’s not (timely) taking possession of the Products, will be at Buyer’s expense.
4. The risk of the Products transfers, regardless of the actual delivery, to Buyer upon the conclusion of the Agreement.
5. Should Buyer request delivery prior to the lapse of the agreed on delivery time, and to the extent to which such is feasible, all subsequent additional costs Seller incurs are at Buyer’s expense.
Article 7 Retention of Title and Claims
1. The ownership of the Products only transfers to Buyer, regardless of the actual delivery, after all claims Seller has pursuant to the Agreement or any other agreement, on Buyer in exchange for the delivered or deliverable Products, as well as claims with regard to any default in the execution of said agreements, have been settled.
2. Buyer is not entitled to transfer, pledge, encumber, process or in any way dispose of any Products still belonging to Seller, with the exception of actions which are part of Buyer’s normal work or company practice.
3. Should Buyer fail to meet the obligations pursuant to the Agreement or otherwise, or should reasonable doubt arise to his doing so in the future, Seller is entitled to remove, or have removed, from Buyer or third parties keeping said Products in storage for Buyer, the delivered Products on which the abovementioned retention of title applies. Buyer is obligated to cooperate with this process in any way.
4. Buyer is obliged to insure any Products delivered under retention of title and to keep them insured against fire, explosion and water damage and against theft and to present the insurance policy for inspection on Seller’s first request.
6. Upon buying, the buyer must inspect the products, after buying the complete risk will go over to the buyer, products are sold: ‘as is, where is ‘
7. Seller is entitled to start its own investigation into the nature, size and cause of the complaint. Under penalty of lapse of his right to claim, all Products relating to the claim made by Buyer, should be carefully stored and be presented to Seller upon first request or be send back to Seller.
8. Claims cannot be made should the defects be caused by everyday wear and tear.
9. Claims cannot be made with regard to defects caused by any external causes and/or Buyer’s actions or failings. In particular, although not exclusively, claims cannot be made should the defects be caused by improper or careless use and/or storage; heavy loading or unprofessional maintenance; repairs, alterations or removal carried out without explicit approval; non-compliance with the user and maintenance guidelines.
10. Claims cannot be made when the fact that the product does not meet its expectation is the result of any government requirements with regards to the nature or quality of the applied construction or materials. In the event of a change in the current technical opinions in the work field or to the relevant government requirements, a default cannot be attributed to Seller solely on that basis and Buyer is not entitled to make a claim solely as a result of this.
Should Buyer make a claim in compliance with the aforementioned, and should this claim be deemed just by Seller, Seller shall, as is its prerogative, determine whether to replace the affected goods or their affected parts, or reimburse them.
Article 8 - Force Majeure
1. Seller is not obligated to observe its obligations should he be hindered as a result of circumstances beyond his control for which he cannot lawfully, legally or socially be held accountable.
2. In these General Terms and Conditions force majeure comprises of all it includes pursuant to law and jurisprudence, as well as all external causes, whether foreseen or unforeseen, on which Seller has no influence, yet which prevent Seller from meeting his obligations, for instance, though not limited to, strikes at Seller’s company.
Article 9 Liability
1. Buyer is entitled to inspect the Products for any defects prior to purchase. The Products are sold and delivered ‘as is, where is’ at the time of the sale, without any warranty and with the exclusion of the provisions listed in article 7:15 and 7:17 BW (Dutch Civil Code), unless explicitly agreed otherwise. Therefore, Seller is not liable for any known or unknown defaults.
2. Seller is not liable towards Buyer with regard to the presence or absence of a CE marking.
3. Seller is not liable for any direct or indirect damage Buyer suffers, explicitly including although not limited to a loss of profits, loss of income, costs incurred during laying up, consequential loss, bodily injury, all forms of financial loss, as well as any claims by third parties, save in the event of intent or conscious recklessness on the side of Seller or by anyone part of Seller’s management.
4. Furthermore, any liability Seller might have in any circumstance, is limited to the damage covered and actually paid out by its insurance company with a maximum of the covered amount in such events.
5. Moreover, Seller shall, without prejudice to the abovementioned, never be held to any reimbursement of damages in the event the amount of the damage exceeds the amount invoiced by Seller for the Products to which the damage directly relates, exclusive of VAT and any other government levies.
Article 10 Disputes and Applicable Law
1. Dutch law shall exclusively govern all Agreements between Parties which are subject to these General Terms and Conditions. The application of the Vienna Sales Convention is expressly excluded.
2. Any disputes between Parties will be filed with the competent judge in the Arnhem district (in the Netherlands).
The terms used in these general terms and conditions are defined as follows:
General Terms and Conditions: the Terms and Conditions listed below
Seller: MACH 4 METAL B.V.
Buyer: Any natural or legal person who purchases Products from Seller, or with whom Seller enters into an Agreement, or with whom Seller is currently negotiating in order to enter into an Agreement.
Products: All goods Seller will supply or has supplied pursuant to the Agreement.
Quotation: The offer made by Seller.
Agreement: Any Agreement with regard to the sales and delivery of Products by Seller, any supplement or alteration to said contract, as well as all legal acts in the preparation or for the execution of the Agreement.
Parties: Seller and Buyer are jointly referred to as the Parties.
Article 2 Applicability
1. These General Terms and Conditions apply to all (price) Quotations Seller makes and all Agreements between Parties.
2. Seller explicitly rejects all alterations and/or additions to these General Terms and Conditions, unless they were validated and accepted in writing. Furthermore, Seller explicitly rejects the applicability of Buyer’s Sales Conditions and/or general terms and conditions, unless these were validated and accepted in writing.
3. Should one or multiple provisions, or parts thereof, as recorded in these General Terms and Conditions be nullified or be determined to be invalid in any other way, this will not affect the validity of the other general terms and conditions. In that event Buyer is obligated to agree to one or multiple substitute stipulations, which will resemble the original provision(s) as closely as possible in both purpose and tenor.
Article 3 Establishment of the Agreement
1. Any Quotations and (price) tenders made by Seller shall remain free of engagement. Seller may revoke its Quotations at all times, even when a fixed acceptance term is listed in the Quotation. Buyer’s request for a Quotation or the placement of an order without prior Quotation, will be regarded a request for the production of a Quotation.
2. Data as well as information which are included in Quotations, images, catalogues, technical drawings, advice, and any other provided - subsequent - information, explicitly do not bind Seller.
3. All intellectual property rights with regards to the drawings and/or images presented as part of the offer, rest with Seller. Buyer is not allowed to multiply, publicise or copy any images or drawings without prior written permission.
4. Agreements are established by either an order confirmation or an invoice (should this precede the order confirmation) sent by Seller to Buyer.
Article 4 Prices
1. Prices are expressed in Euros and are, unless otherwise specified, exclusive of VAT, other taxes or surcharges, packing/packaging, and transport costs, as it is where it is.
2. Should one or more of the cost factors be altered after the date of the Quotation but before delivery, Seller is entitled to adjust the agreed on price accordingly, this also applies to binding quotations.
Article 5 Payment
1. Payment shall be made within 48 hours after the invoice date, unless otherwise agreed in writing. Payment should be effectively made in the agreed upon currency. Buyer cannot claim settlement and/or deferment.
2. Prior to the observance of its obligations pursuant to the Agreement, Seller is entitled to request proper security to support Buyer’s payment obligations. Buyer’s refusal to provide the requested security entitles Seller to annul the Agreement(s) in writing or - as is its prerogative- to suspend its obligations.
3. Should Buyer not make payment within the agreed on term, he is deemed to be in immediate default which entitles Seller to increase the amount due with either a default interest of 5% per month or the statutory commercial interest rate under article 6:119a BW (Dutch Civil Code), starting on the invoice date (a part of the month counting as a whole), of the gross invoice amount up until the time of full payment.
4. Should Buyer not meet its (payment)obligations, he is obligated to reimburse all (collecting)fees to Seller.
5. In contravention to paragraph 1, payment will be immediately due when the agreed on price (or part thereof) is not paid promptly, when Buyer is in a state of bankruptcy or equal circumstances, requests moratorium, when legal restraint or administration is requested, or when any attachment is placed on Buyer’s property or receivables.
Article 6 - Delivery
1. The delivery period provided by Seller is indicative only. The exceeding of the delivery period will not lead to Seller’s liability without factual proof of default.
2. Delivery of the Products will be made, unless otherwise agreed, ex works. The Products are deemed to be delivered once they have been offered by Seller to Buyer at the agreed on time and location for the first time.
3. Buyer is obligated to take possession of the Products on the agreed on time and place. Any transportation, storage or additional costs relating to Buyer’s not (timely) taking possession of the Products, will be at Buyer’s expense.
4. The risk of the Products transfers, regardless of the actual delivery, to Buyer upon the conclusion of the Agreement.
5. Should Buyer request delivery prior to the lapse of the agreed on delivery time, and to the extent to which such is feasible, all subsequent additional costs Seller incurs are at Buyer’s expense.
Article 7 Retention of Title and Claims
1. The ownership of the Products only transfers to Buyer, regardless of the actual delivery, after all claims Seller has pursuant to the Agreement or any other agreement, on Buyer in exchange for the delivered or deliverable Products, as well as claims with regard to any default in the execution of said agreements, have been settled.
2. Buyer is not entitled to transfer, pledge, encumber, process or in any way dispose of any Products still belonging to Seller, with the exception of actions which are part of Buyer’s normal work or company practice.
3. Should Buyer fail to meet the obligations pursuant to the Agreement or otherwise, or should reasonable doubt arise to his doing so in the future, Seller is entitled to remove, or have removed, from Buyer or third parties keeping said Products in storage for Buyer, the delivered Products on which the abovementioned retention of title applies. Buyer is obligated to cooperate with this process in any way.
4. Buyer is obliged to insure any Products delivered under retention of title and to keep them insured against fire, explosion and water damage and against theft and to present the insurance policy for inspection on Seller’s first request.
6. Upon buying, the buyer must inspect the products, after buying the complete risk will go over to the buyer, products are sold: ‘as is, where is ‘
7. Seller is entitled to start its own investigation into the nature, size and cause of the complaint. Under penalty of lapse of his right to claim, all Products relating to the claim made by Buyer, should be carefully stored and be presented to Seller upon first request or be send back to Seller.
8. Claims cannot be made should the defects be caused by everyday wear and tear.
9. Claims cannot be made with regard to defects caused by any external causes and/or Buyer’s actions or failings. In particular, although not exclusively, claims cannot be made should the defects be caused by improper or careless use and/or storage; heavy loading or unprofessional maintenance; repairs, alterations or removal carried out without explicit approval; non-compliance with the user and maintenance guidelines.
10. Claims cannot be made when the fact that the product does not meet its expectation is the result of any government requirements with regards to the nature or quality of the applied construction or materials. In the event of a change in the current technical opinions in the work field or to the relevant government requirements, a default cannot be attributed to Seller solely on that basis and Buyer is not entitled to make a claim solely as a result of this.
Should Buyer make a claim in compliance with the aforementioned, and should this claim be deemed just by Seller, Seller shall, as is its prerogative, determine whether to replace the affected goods or their affected parts, or reimburse them.
Article 8 - Force Majeure
1. Seller is not obligated to observe its obligations should he be hindered as a result of circumstances beyond his control for which he cannot lawfully, legally or socially be held accountable.
2. In these General Terms and Conditions force majeure comprises of all it includes pursuant to law and jurisprudence, as well as all external causes, whether foreseen or unforeseen, on which Seller has no influence, yet which prevent Seller from meeting his obligations, for instance, though not limited to, strikes at Seller’s company.
Article 9 Liability
1. Buyer is entitled to inspect the Products for any defects prior to purchase. The Products are sold and delivered ‘as is, where is’ at the time of the sale, without any warranty and with the exclusion of the provisions listed in article 7:15 and 7:17 BW (Dutch Civil Code), unless explicitly agreed otherwise. Therefore, Seller is not liable for any known or unknown defaults.
2. Seller is not liable towards Buyer with regard to the presence or absence of a CE marking.
3. Seller is not liable for any direct or indirect damage Buyer suffers, explicitly including although not limited to a loss of profits, loss of income, costs incurred during laying up, consequential loss, bodily injury, all forms of financial loss, as well as any claims by third parties, save in the event of intent or conscious recklessness on the side of Seller or by anyone part of Seller’s management.
4. Furthermore, any liability Seller might have in any circumstance, is limited to the damage covered and actually paid out by its insurance company with a maximum of the covered amount in such events.
5. Moreover, Seller shall, without prejudice to the abovementioned, never be held to any reimbursement of damages in the event the amount of the damage exceeds the amount invoiced by Seller for the Products to which the damage directly relates, exclusive of VAT and any other government levies.
Article 10 Disputes and Applicable Law
1. Dutch law shall exclusively govern all Agreements between Parties which are subject to these General Terms and Conditions. The application of the Vienna Sales Convention is expressly excluded.
2. Any disputes between Parties will be filed with the competent judge in the Arnhem district (in the Netherlands).
Anfrage senden
TELEFON & FAX
Telefon:
+31 316 443 000
Fax: +31316247956
Diese Inserate könnten Sie auch interessieren.
Kobližná 3, 602 00 Brno-střed, Tschechien

2016
gut (gebraucht)
Inv. Num. : 5876
Type: ARG 640 DC SAF
Goxswdf
Produzent: PILOUS
Erzeugt: 2016
Parametern:
Minimale Bandvorschubgeschwindigkeit: 20 m/min
Maximale Bandvorschubgeschwindigkeit: 90 m/min
Schnittbereich: 640 mm
Sägeblattgröße: 5770x41x1.3 mm
Gesamtleistungsbedarf: 8.8 kW
Länge: 3800 mm
Breite: 2050 mm
Höhe: 2500 mm
Gewicht: 4200 kg
Ausstattung:
2x Rollenbahn G1000 (Länge 3000 mm)
12
Capacity 90°: 260°
Cutting flat 90°: 300 x 200 mm
Capacity L 45°: 175°
Capacity R 45°: 200°
Cutting speed Vario:35 + 70 m/min.
Bu9xg8nune
Circle blade size: 2880 x 27 x 0,9 mm
Power: 1,4 kW
Length: 1.900 mm
Width: 1.800 mm
Height: 2.000 mm
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it...
9
Bottrop-Grafenwald, Deutschland

(Händlerstandort)
2022
neu
Schnittdurchmesser 330 mm
Bennndyvt7
Sägebandlänge 3870 x 34 x 1,1 mm
Schnittbreite 400 mm
Bandgeschwindigkeit 15 - 90 m/min
Schnittleistung flach 90° 400 x 200 mm
Schnittleistung - Rund 330 bei 90° mm
Schnittleistung flach 45° 250 x 140 mm
Schnittleistung - Rund 240 bei 45° mm
Arbeitshöhe 945 mm
Schnittleistung - Vierkant 320 bei 90° mm
Schnittleistung - Vierkant 200 bei 45° mm
Gesamtleistungsbedarf 3,0 kW
Maschinengewicht ca. 720 kg
Raumbedarf ca. 2650 x 2040 x 2050 mm
Beschreibung:
Äuße...
10
- Hohe Stabilität durch den geformten Sägearm
- Perfekte Schnittergebnisse durch das 27×0,9mm Sägeblatt
- Ausgestattet mit optionalem CD-Display (für Bandsägespannung)
SPEZIFIKATIONEN:
- CD-Anzeige für Bandsägespannungsmesser
- Links 45° und rechts 60° einstellbar
- 2 Bandgeschwindigkeiten: 40 und 80 m/min.
Bvcjlqqjqy
- Motor: 400V / 1,4kW
- Gewicht: 290kg
KAPAZITÄT:
- 90°: 235 / 230 / 280x180mm (rund / quadratisch / rechteckig)
- 45°: 185 / 160 / 160x100mm (rund / quadratisch / rechteckig)
OPTI...
10
Bottrop-Grafenwald, Deutschland

(Händlerstandort)
2022
neu
Schnittdurchmesser 300 mm
Vysy9dzl
Sägebandlänge 3150 x 27 x 0,9 mm
Schnittbreite 375 mm
Bandgeschwindigkeit 15 - 90 m/min
Schnittleistung flach 90° 375 x 190 mm
Schnittleistung - Rund 300 bei 90° mm
Schnittleistung flach 45° 240 x 160 mm
Schnittleistung - Rund 240 bei 45° mm
Arbeitshöhe 910 mm
Gesamtleistungsbedarf 2,2 kW
Maschinengewicht ca. 420 kg
Raumbedarf ca. 2180 x 1660 x 2030 mm
Beschreibung:
Stufenlose Einstellung des Schnittwinkels im Bereich von 90°60°, wobei die
Position des g...
5
Bottrop-Grafenwald, Deutschland

(Händlerstandort)
2022
neu
Schnittdurchmesser 330 mm
Sägebandlänge 3870 x 34 x 1,1 mm
Schnittbreite 400 mm
Bandgeschwindigkeit 15 - 90 m/min
Schnittleistung flach 90° 400 x 200 mm
Schnittleistung - Rund 330 bei 90° mm
Schnittleistung - Vierkant 320 bei 90° mm
Schnittleistung flach 45° 250 x 170 mm
Schnittleistung - Rund 250 bei 45° mm
Schnittleistung - Vierkant 230 bei 45° mm
Schnittleistung - Rund 165 / 60° mm
Schnittleistung flach 60° 150 x 150 mm
Schnittleistung - Vierkant 150 / 60° mm
Kühlmittelbehälter 665 l
Arbeitsh...
10
Bottrop-Grafenwald, Deutschland

(Händlerstandort)
2022
neu
Schnittdurchmesser 330 mm
Sägebandlänge 3870 x 34 x 1,1 mm
Schnittbreite 360 mm
Bandgeschwindigkeit 15 - 90 m/min
Schnittleistung flach 90° 360 x 250 mm
Schnittleistung - Rund 330 bei 90° mm
Schnittleistung flach 45° 250 x 150 mm
Schnittleistung - Rund 250 bei 45° mm
Arbeitshöhe 850 mm
Schnittleistung - Vierkant 320 bei 90° mm
Schnittleistung - Vierkant 240 bei 45° mm
Kühlmittelbehälter 40 l
Steuerung
Gesamtleistungsbedarf 5,67 kW
Maschinengewicht ca. 1450 kg
Raumbedarf ca. 1930 x 2070 x 200 m...
10
Bottrop-Grafenwald, Deutschland

(Händlerstandort)
2022
neu
Schnittdurchmesser 330 mm
Sägebandlänge 3870 x 34 x 1,1 mm
Schnittbreite 400 mm
Bandgeschwindigkeit 15 - 90 m/min
Schnittleistung flach 90° 400 x 200 mm
Schnittleistung - Rund 330 bei 90° mm
Schnittleistung flach 45° 250 x 170 mm
Schnittleistung - Rund 250 bei 45° mm
Arbeitshöhe 940 mm
Schnittleistung - Vierkant 320 bei 90° mm
Schnittleistung - Vierkant 230 mm
Gesamtleistungsbedarf 3,0 kW
Maschinengewicht ca. 665 kg
Raumbedarf ca. 2660 x 204 x 2060 mm
Beschreibung:
Die ARG 330 F. ist eine rob...
15
Roosendaal, Niederlande

(Händlerstandort)
2008
gebraucht
ABS ,Kühlaggregat
Jxu3fe
5
Motorisierte Betonsteinfertigungsmaschine
Herstellung von Betonsteinen für Mauerwerk, Fundamente, Säulen, Böden und Kamine.
Leistungsstarke hydraulische Presse
Sitz des Fahrers
Betontank - 500 Liter
Automatisches Anheben der Gegenform
Maximale Abmessungen der Form 1200x400mm
Maximale Höhe des Betonprodukts: 200 mm
Zykluszeit: 45 Sekunden
Installierte Leistung: 5,5 kW
Versorgungsspannung: 380V
Gesamtabmessungen: 2,2 x 2,0 x 1,85 m
Masse (einschließlich Form): 2000kg
Drehfrequenz des Rüttelmotors:...
3
6
Garantie in Monaten: 12
Artikelzustand: Gebraucht aus Lagerbestand
Qef32
Länge: 1,44 m
Gehäuse: Leichte Lagerspuren
Gebrauchsspuren: Geringe Gebrauchsspuren
Artikelnummer: FT20000-1235
2
Staufenberg, Deutschland

(Händlerstandort)
gebraucht
Personal-Zeiterfassungsgeraet Fabr. Z + M Typ Argus J 30 Plus
Fabr.# 8383
Technische Daten:
Uhr digital (Zeit, Datum, Wochentag)
Genauigkeit 15 sek./Monat
Druckknopf Tintenstrahl schwarz
Datensicherung bei Stromausfall 3 Monate
Gewicht ca. 4,5 kg
Aussenmasse ca. 160 x 205 x 128 mm
mit
Mqpjn
- Scanner
gebraucht, funktionsbereit
10
Buch am Erlbach

gut (gebraucht)
Fronius Selectiva PLUS 8140 D - fully functional
Gerät im April 2020 , vom Fachdienst überholt worden.
2-80V
0,1-140A
Nass und GEL Batterien
Profi Ladegerät - Stapler / Batterie Service.
Formatierung / Desulfatierung / Regenerierung/ Tiefentladung
Cornrl9
Anschluss 400V-32A
Mit neuer UVV Prüfung.
Rechnung mit ausgewiesener MwSt.
Abholung in 84172 Niedererlbach, Versand auf Anfrage!
Keine Garantie Keine Gewährleistung
5
Wiefelstede, Deutschland

(Händlerstandort)
gebraucht
Grossformatdrucker, Plotter Farb-Tintenstrahldrucker
-Druckerbreite: max. 61 cm
-Abmessungen: 1250/450/H330 mm
-Gewicht: 40 kg
Liawh
5
Wiefelstede, Deutschland

(Händlerstandort)
gebraucht
Aufbohrer, Spiralbohrer, Bohrer, Spiralsenker, Dreischneider, Spiralbohrer
-Dreischneider
-Durchmesser: 17,75 mm
-nutzbare Länge: 150 mm
Libvz
-Aufnahme: MK2
-Typ: HSSE
-Anzahl: 19 Stück
-Verkauf: nur komplett
-Gewicht: 6 kg
Dortmund, Deutschland

(Händlerstandort)
gebraucht
Manufacturer, Model:Xeikon 3030 Plus | Digital Label Press
Status: Xeikon Service
Installiert: 2015
Drucktechnik: Elektrografie mittels QA-I Trockentoner
Bebilderungskopf: High-Precision LED Matrix
Druckwerke: One-Pass, 5 (CMYK+White/Spot)
Medienzuführung: Rolle
Medienausgabe: Rolle
I3ys0hf3y
Bildqualität: 1200 x 3600 dpi, variable Punktgroße
Materialbreite: 200-330 mm Rollenbreite
Max. Druckbreite: 322 mm
Toner: QA-IC (ICE) Trockentoner
Druckgeschwindigkeit: bis zu 15 m/min
Grammatur: 40-350 g/...
4
Verwendungszweck: Landwirtschaft
Blpvbzleee
14
Rothenberger Rocam 4 plus Rohrinspektionskamera, Rohrkamera 30m
made by Rothenberger ROCAM 4 Plus
1 Stück 30 m Kabel,
1 40-mm-Kamerakopf
1 CAS-Ladegerät, EU - RO BC 14/36 - 50/60 Hz 85W Max. 3,0 A
1 db CAS-Batterie, 18 V / 4 Ah;
1 Führungskugel 40 mm
1 Steueradapter für den Kamerakopf
1 Eingabestift
1 GB SD-Karte 4 GB
1 USB-Datenkabel
2 Stück ROCASE 4414
2 Befestigungselemente
1 ROCASE Transportwagen
Eigenschaften:
Displaygröße: 10,4" (Höhe: 19,81 mm Breite: 26,42 mm)
- Einfach zu bedienend...
8
Vilnius

2012
neuwertig (gebraucht)
Halbautomatisch nur 90 Grad, schwere Ausführung.
B8r8a02byp
Schnittbereich: 500x500 mm, 4 kW Motor. Manuelle Anleitung.
Guter Arbeitszustand, Video des Arbeitsprozesses auf Anfrage.
Bereit zum Verkauf.
1
Behaelter ZETA PLUS Filter
Model: 12 ZPC 2
Material: 316 L
Max. Betriebsdrueck: 5 bar
Ksgyyuo2
Temperatur: 90 C°
Gewicht: 110 kg
3
Wiefelstede, Deutschland

(Händlerstandort)
gebraucht
Maschinenreibahlen, Reibahle, Reibwerkzeug, Passmesser-Schneidsatz, Nietreibahle, Niet Reibahle
-verschiedene Hersteller: TITEX PLUS, UNISTO...
-Aufnahmen: MK2/MK3/MK4
-verschiedene Größen: 13-40 mm so wie auf Fotos zu sehen
-Verkauf: nur komplett
-Gewicht: 11 kg
Ls0jt
9
Nordrhein-Westfalen, Deutschland

neu
- Unsere Angebotsnummer: 235/116
- Getriebemotor mit Frequenzumrichter
- Hersteller: Sew Movimot
- Typ: MM05C-503-30 WA20/TDT71D4
- Leistung :0,55 KW
- Wellendurchmesser aussen 30 mm
- Gewicht :13,5 Kg
- Verkaufsmenge pro Auktion 1 Stk ( 8 Stk Verfügbar)
- optischer Zustand gemäß Fotos
- Neu mit Lagerspuren
- funktionsfähig
Bvuoa889rf
Hinweise:
Die hier angebotene Ware stammt in der Regel aus Firmenauflösungen und Insolvenzen. Aufgrund fehlender Typenschilder ist es nicht immer möglich, exakt...
6
Baden-Württemberg, Deutschland

neu
Artikelzustand Neu aus Lagerbestand
Gehäuse Leichte Lagerspuren
Garantie in Monaten 12
Frequenz 50 Hz
Drehzahl 2940 U/min
Leistung 15 kW
Spannung 400 / 690 V
Strom 27,2 / 15,7 A
Schutzklasse (IP) 55
Wellendurchmesser 42 mm
Wellenende Passfeder
Passfeder 12 x 90 mm
Gewicht 82.24 kg
Lagerort Rosenfeld
Lagerplatz P5D1
Lw7c982hs
5
Wiefelstede, Deutschland

(Händlerstandort)
gebraucht
Obersupport, Oberschlitten, Schwalbenschwanz-Führung
-kommt: von einer Drehmaschine
-Abmessungen: 560/235/H275 mm
-Gewicht: 58 kg
Jvbnu3
13
Oberhausen

1978
sehr gut (gebraucht)
Kryogener Lagertank für flüssigen Sauerstoff (LOX), Argon (LAR), Stickstoff (LIN)
Volumen: 27780L
Arbeitsdruck: 20 bar
Bv3c33stk0
Vakuum-Isolierung
Ausfuhr aus der EU
Gerne erstellen wir Ihnen auch ein Angebot oder geben Ihnen weitere Informationen über andere Behälter.
4
Schnittdurchmesser 180 mm
Sägeblattlänge 400 mm
Hub - mm
Schnittbereich bei 90 Grad: vierkant 180 x 180 mm
Schnittbereich bei 90 Grad: flach 190 x 160 mm
Schnittbereich bei 45 Grad: rund 140 mm
Schnittbereich bei 45 Grad: vierkant 140 x 140 mm
Schnittbereich bei 45 Grad: flach 140 x 150 mm
Hubzahl 52 / 105 Hub/min
Gesamtleistungsbedarf 0,5 kW
Maschinengewicht ca. 150 kg
Abmessungen der Maschine L x B x H 1,49 x 0,7 x 0,87 m
Co09g20r
Zubehör: Längenanschlag
4
Breite 35 cm
Uhblzbld
Baujahr 2005
Friktionsanleger
2 Falztaschen in der Parallelbruchpartie
Lärmdämmhaube
fahrbarer Unterbau
Lieferzeit: sofort ab Lager
Fold Master 235 Faltmaschine.
2 Beutel, (aber 4 Beutel Maschinenchip enthalten!)
Guter Zustand ,
ausgezeichneter Betriebszustand,
max: 350x500mm
mindestens: 90x120mm
Papierstärke:zwischen 40-240mm
mit Kompressor, 240V Netzstrom,
vorprogrammierter Antrieb mit automatischem Motorstart.
Iemhcgz
kein Hubtisch, Luftunterblasung, Saugrad
5
Miastko

sehr gut (gebraucht)
Köpfe:
1. Stock 4kW
2. rechts 4kW
3. links, 5.5.5kW
4. schlechte 11kW
5.am besten 5.5kW
6.untere 4kW
Arbeitshöhe 14cm
Arbeitsbreite 23cm
Botqa39m
Max. Vorschubgeschwindigkeit 43 m / min
3 Zugrollen im Tisch
Elektrische Verstellung der Oberköpfe
Spindeldurchmesser 40mm
Zentralschmierung
4
Hattersheim am Main

generalüberholt (gebraucht)
- Einlaufbreite 350 mm
- Unterflur-Sauganleger mit Blassluft
- Kompressor mit 40 m³
- 2 elektr. automatische Falztaschen
- Bedienung über Steuerelektronik 235.111
- elektrische Band- Schuppenauslage
- mit Rollwagen
- Bedienungsanleitungen
- Papierformat: 90 x 120 mm (min.)
- Papierformat: 350 x 500 mm (max.)
- Grammatur: 40 – 240 g/m²
- Geschwindigkeit: Bis zu 30.000 Bogen/Stunde
- Falzlänge: 20 mm (min.)
- Falzlänge: 425 mm (max.)
- Falzwalzen neuwertig.
Anschluss 240V
Absicherung: 16 Amp.
Z...
15
Verwendungszweck: Bauwesen
Leergewicht: 2.000 kg
Technischer Zustand: sehr gut
Cpfh2hj
Optischer Zustand: sehr gut
6
Battenfeld Plus 350/75 / Perfekter technischer Zustand / Betriebsstunden: 25.200 h
Caoqdy0vdu
Baujahr: 2006
Spritzeinheit:
Schneckendurchmesser: 25 mm
Spritzgewicht: 44.6 g
Spritzdruck: 1575 bar
Dosiervolumen: 49 ccm
Schließeinheit:
Schließkraft: 35 t
Holmabstand: 270 mm
Größe der Aufspannplatten: 470x280 mm
Auswerfer: hydraulisch
Schließeinheit: hydraulisch
Steuerung: UNILOG B2
Zusätzliche Ausrüstung:
Perfekter technischer Zustand
Betriebsstunden: 25.200 h
Luftventil x 1
Spritzaggregat gehä...
8
Nevers, Frankreich

(Händlerstandort)
einsatzbereit (gebraucht)
Technische Merkmale
Verleimungsgruppe
Endschnitt
Fräsgruppe
Qgpp2
Kantenschaben (Option)
Polieren Minimale Plattendicke: 8 mm Maximale Plattendicke: 50mm Minimale Banddicke: 0,4 mm Maximale Banddicke: 8mm Strom und Motoren
Einstecken: Dreiphasig Gesamtabmessungen
10
Unterschleißheim, Deutschland

(Händlerstandort)
2009
gebraucht
Innendurchmesser 5 - 100 mm
Schleiftiefe 150 mm
Umlaufdurchmesser 310 mm
Yrrh8d90
Werkstückspindeldrehzahl 0 - 3000 U/min
Z1- Achse 300 mm
x-Achse 1050 mm
Zustellgeschwindigkeit 0,01 - 10 mm/min
Werkstückspindel - Bohrung 45 mm
Werkstückspindelflansch Ø 220 mm
Gesamtleistungsbedarf 45 kW
Maschinengewicht ca. 12 t
Raumbedarf ca. m
2
Wiefelstede, Deutschland

(Händlerstandort)
gebraucht
Metallbandsägeblatt, Bandsägeblatt, Metallsägeband
Blirnsr
-ungebraucht OVP
-Anzahl: 7x Blätter vorhanden
-Preis: pro Stück
-Verzahnung: 4/6 K-POS
-Abmessungen: 2835/27/H0,9 mm
-Gewicht: 0,6 kg/Stück
6
Burgos, Spanien

(Händlerstandort)
2004
neuwertig (gebraucht)
Upgrade: 2022 Numerische Programmsteuerung: HEIDENHAIN TNC-530 Merkmale Abmessungen Tischabmessungen: 2500 x 700 mm Anzahl der T-Nuten: 5 T-Nutenabmessungen: 22 mm Achsübergänge X-Achsübergang: 2500 mm Y-Achsübergang: 800 mm Z-Achsübergang: 800 mm Kopfart: Universal UDG mit automatischer Indexierung (2,5°) Werkzeugspannsystem: Hydraulisch Kegelmaul: ISO 50 (DIN 69871) Drehzahlbereich: 20 - 3000 U/min Spindelleistung: 22 kW Papiervorschub Vorschubgeschwindigkeit: 5 - 5000 mm/min Quick refresh: 12...
10
Ennepetal, Deutschland

(Händlerstandort)
1997
gebraucht
Spitzenhöhe 345 mm
Drehdurchmesser 690 mm
Drehlänge 2000 mm
Steuerung Heidenhain Manual Plus
Psjpl
Umlaufdurchmesser max. über Planschieber 420 mm
Umlaufdurchmesser über Bett 710/760 mm
Längshub 1970
Planhub 385
Spindelbohrung 92 mm
Gesamtleistungsbedarf 49 kW
Maschinengewicht ca. 5,6 t
Raumbedarf ca. / m
Zubehör:
- 2 x Lynette
- Spänewanne
- 4 x Multifix Drehstahlhalter
- 3 x Zentrierspitze
- Ersatz Backensatz
2
Battenfeld Plus 350/75
Baujahr: 1996
Spritzeinheit:
Schneckendurchmesser: 22 mm
Spritzgewicht: 34.5 g
Spritzdruck: 2034 bar
Dosiervolumen: 38 ccm
Schließeinheit :
Schließkraft: 35 t
Holmabstand: 270 mm
Größe der Aufspannplatten: 470x280 mm
Auswerfer: hydraulisch
Schließeinheit: hydraulisch
Steuerung: UNILOG 1020
Zhqkcmhr
Zusätzliche Ausrüstung:
*
Maße:
Gewicht: 1050 kg
Länge/Breite/Höhe: 2.24x0.88x1.70 m
Antrieb:
Pumpen/Motor: 7,5 kW
Heizleistung: 2,76 kW
Gesamtleistung: 10,26 kW
Preis: A...
4
Tragkraft 2 t
Hub 3000 mm
Gesamtleistungsbedarf kW
Maschinengewicht ca. 0,025 t
Nlpn7
Raumbedarf ca. 0,3 x 0,4 x 0,2 m
3
Friedberg, Deutschland

(Händlerstandort)
1900
gebraucht
Kabine
ref: 313641 Fahrzeugstecker 160 A DIN, Netzstecker CEE 400V/16A, Ladegerät mit Elektrolytumwälzung, gebrauchtes Timetronic Plus 24 V Batterieladegerät 24 V/125, inkl Kabel und Stecker, mit Elektrolytumwälzung Spannung : 24v Modell Batterie:
Dw0pj3
5
Wiefelstede, Deutschland

(Händlerstandort)
gebraucht
Futterflansch, Flanschaufnahme, Drehfutterflansch, Mitnehmerflansch
0yupf30
-Futterflansch für: Dreibackenfutter, Vierbackenfutter, Planscheibe
-Außendurchmesser: 235 mm
-Lochkreis: Ø 132/ M12
-Abmessungen: Ø 235/H110 mm
-Gewicht: 7,8 kg
6
Nattheim, Deutschland

(Händlerstandort)
gebraucht
max. Furnierstärke : 2.0 mm
min. Furnierstärke : 0.4 mm
Zusammensetzmaterial : Fugenverleimung mit Weisleim und Zick-Zack
Druckluft erforderlich : Ja
Diskussscheibe : Ja Zur Beförderung des Furniers über den Furniertisch.
Maschinentyp : stationär
Vorschubgeschwindigkeit : 10 - 50 m/min
Vorschubart : stufenlos
Bjtotmjjib
Ständerausladung : 1200 mm
Lagerort: Nattheim