Fgt Graphic Machinery Die-Cutting gebraucht kaufen (76.398)

Baujahr: 2013, Zustand: gut (gebraucht), • Max Sheet Size: 1,060 x 760 mm • Min Sheet Size: 400 x 350 mm • Max Cutting Size: 1,060 x 745 mm • Gripper Margin: 10 mm • Max Mechanical Speed: 7,700 sheets/hour • Paper Range: o Paperboard: 90–2,000 g/m² o Corrugated board: up to 4 mm (depending on flute) • Cutting Force: 260 tons • Pile Height (Feeder/Delivery): o Feeder: up to 1,350 mm o Delivery: up to 1,150 mm • Feeder Type: Non-stop • Delivery Type: Non-stop • Register System: Optical and mechanical sheet alignment Nsdjw E Iumspfx Afkelh • Die-Cutting Plate Size: 1,080 x 760 mm _____

Zustand: gut (gebraucht), Baujahr: 2011, • Wohlenberg WB 92 TS cutting machine • Approx. 920 mm cutting width • Programmable control • Large stainless-steel working tables • Side tables • Waste / trim removal system • Conveyor system • Baumann material handling equipment • Baumann unloading equipment • Baumann jogging equipment • 4 cutting knives included The waste disposal / conveyor equipment is stated to date from approximately 2017. _____ BAUMANN PERIPHERAL EQUIPMENT The cutting system is complemented by professional Baumann handling equipment. Baumann Unit – Type BA 3N According to the machine plate: • Manufacturer: Heinrich Baumann • Type: BA 3N • Machine No.: 1322 • Voltage: 400 V / 3N~ • Frequency: 50 Hz • Rated current: 9 A • Power: 3 kW • Stated load: 1,000 N • Made in Germany The exact year is not shown on the visible nameplate. Unloading Equipment The unloading unit is stated by the owner to be approximately 10 years older than the main cutting machine. Jogging Table The Baumann jogging equipment is stated to be approximately 20 years older than the main cutting machine. These age indications are based on information supplied by the machine owner and should therefore be considered approximate. _____ INCLUDED TOOLING A particularly useful part of the package is the knife set: 4 x cutting knives included This reduces the buyer's initial requirement for additional cutting tooling and provides spare knife capacity for ongoing production. _____ WHY BUY THIS CUTTING LINE? Complete Production Package Instead of purchasing only a stand-alone guillotine, the buyer receives a complete cutting and material-handling solution with peripheral equipment. Proven German Technology Baumann and Wohlenberg equipment is widely used in professional printing and finishing operations and is known for robust mechanical construction. 920 mm Production Class The 92 cm cutting format is highly versatile and suitable for a wide range of commercial printing, digital printing, bookbinding and finishing applications. Material Handling Included The additional Baumann equipment can significantly improve workflow compared with operating a stand-alone cutting machine. Waste Handling & Conveyors Integrated peripheral systems help reduce manual handling around the cutting process and improve production organisation. Four Knives Included _____ SUITABLE APPLICATIONS The system can be used for: • Commercial print finishing • Digital print finishing • Bookbinding • Brochures and catalogues • Sheet cutting • Printed paper Nsdpsz Ei D Djfx Afkslh • Cardboard and light board applications • Short- and medium-run finishing • General post-press production _____ FGT VALUE – MORE THAN JUST A MACHINE Purchasing used graphic machinery internationally involves more than simply buying equipment. FGT Graphic Machinery can support the complete project from inspection through delivery. Our services can include: • Technical machine evaluation • Inspection coordination • Machine demonstration • Professional dismantling • Preparation for transport • Packing • Loading • International truck transport • Sea freight • Export documentation • Customs preparation • Installation coordination • Technical support _____

Baujahr: 2007, Zustand: gut (gebraucht), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: “Machine under power _____ Format & Substrate Capabilities Nedpoxzr Hpjfx Afkelh • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic register system: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Full automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Zustand: gut (gebraucht), Baujahr: 2021, Manufacturer: Duplo Model: PFi Blade B3+ Year: 2021 Incoterm: FCA, Germany (free loaded onto truck) FGT Condition Rating: ★★★★★☆ (9/10) _____ Why this machine is interesting The Duplo PFi Blade B3+ is a compact and highly versatile digital cutting table designed for short-run and on-demand production. It combines cutting, kiss-cutting and creasing in a single operation, making it ideal for packaging prototypes, labels, greeting cards, folding cartons and digital print finishing without the need for conventional dies. Its CCD camera registration system ensures excellent accuracy, while the automatic feeder allows efficient unattended production. _____ Technical Data • Working size: 210 × 297 mm up to 400 × 600 mm • Material thickness: up to 1.3 mm • Paper weight: 120 – 400 g/m² (depending on application) • Cutting speed: up to 800 mm/sec Nodpeznun Ajfx Afkslh • Cutting accuracy: ± 0.3 mm • Tungsten steel cutting blades • 3 tool heads: Cutting, Kiss-Cut and Creasing • CCD camera registration system • Automatic pile feeder with 5 combined suction heads • Feeder capacity: 100 mm • Power supply: 220 V / 50 Hz / 20 A • Connected load: 4 kW • Dimensions (L × W × H): 2,540 × 810 × 1,060 mm _____ Included Equipment • PC with monitor, keyboard and mouse • Cutting and control software • Permanent transferable software licence • CCD camera registration system • Three tool heads (Cutting, Kiss-Cut and Creasing) • Complete tool holders and accessories • Assorted spare blades • Operating manual and technical documentation • Data backup available • Separate vacuum table compressor included _____ Availability • Immediately available • Machine under power • Demonstration possible by appointment _____

Baujahr: 1984, Zustand: gut (gebraucht), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: Nljdpsycv Dvsfx Afkjh 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Baujahr: 2020, Zustand: einsatzbereit (gebraucht), Angeboten wird ein umfangreiches Maschinenpaket für Textilverarbeitung, automatischen Zuschnitt, Laserschneiden, industrielle Näharbeiten, Stanzen und Nieten. 1) CO₂-Laser-Schneid- und Graviermaschine Trotec Rayjet 50 mit zugehöriger Absauganlage, Arbeitsbereich: ca. 457mm/305mm, Laserleistung: 30W, max. Bearbeitungsgeschwindigkeit: ca. 1,5m/s, Aigner/Trotec Atmos Cube Absauganlage, Baujahr: 2020, Luftleistung: 320m³/h. 2) Einnadel-Doppelsteppstich-Flachbettmaschine mit Dreifachtransport und großem Vertikalgreifer Dürkopp Adler 867 ECO, Unterklasse 867-190020-M, max. Stichlänge: ca. 9mm, Durchgang: ca. 335mm, Durchgangshöhe: ca. 125mm. 3) Einnadel-Doppelsteppstich-Schnellnäher Juki DDL-9000B-SS, Baujahr: 2019, max. Nähgeschwindigkeit: ca. 5000Stiche/min, max. Stichlänge: ca. 5mm, Nadelstangenhub: ca. 30,7mm. 4) Einnadel-Doppelsteppstich-Schnellnäher Dürkopp Adler 261-140342-02, max. Stichlänge: ca. 5mm, Steuerung: AHE59. 5) Säulennähmaschine Pfaff 591-900/81-BL. 6) 2 baugleiche Schwenkarm-Stanzmaschinen Moneus 1333. 7) Manuell betätigte Niet- und Setzmaschine mit mechanischem Fußantrieb. Dokumentation vorhanden. Besichtigung nach Absprache möglich. Nsdpfxjzt Skxe Afkolh

Baujahr: 2018, Zustand: neuwertig (gebraucht), GRAFOTRONIC DCL2, Age: 2017/2018  Manufacturer : GRAFOTRONIC  Year of Installation : 2017 with Upgrade 2018  Max. width: 350mm  Unwinding diameter: 1000mm  Web edge control  Semi rotary printing unit  GEW Drying UV  Semi-rotative die-cutting / drawn onto sheet metal Nsdpjncfukofx Afkolh  Laminating  Cold foil stamping  Labelshifter  Punching length: 609,6mm  Lattice proofing  manual knife box  Automatic Turret  2 x spindle

Baujahr: 2000, Zustand: gut (gebraucht), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Data: Max. sheet size: 740 x 1040 mm Min. sheet size: 350 x 400 mm Max. speed: 8,000 sheets/hour Max. cutting force: 250 tons Running hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (1 mm plates) C.U.B.E. system Nsdoyz Adnspfx Afkjlh Stripping section 1 set of stripping frames (quick lock) including tools Non-stop delivery Condition: Machine is in good working condition Can be inspected in production upon request _____ Key Advantages: Reliable and proven BOBST technology Strong cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for fast job changeover Well-maintained machine with relatively low running hours _____

Zustand: gut (gebraucht), MPS EF 410 – 8 color Label Printing Machine Ref.: FGT 25-230 We are pleased to present this 2008 MPS EF 410 - a high-precision, versatile UV flexo press designed for a wide range of applications. The MPS EF 410 model is a servo-driven, 410mm wide, multi-substrate press, capable of running self-adhesive materials as well as unsupported plastic films. With robust features and premium components, this machine is engineered for reliable, high-quality production. _____ Nedpfx Afeu Rdgbokelh Key Specifications & Configuration • Printing Width: 410 mm • Technology: Servo-driven UV flexo press • Substrate Handling: Spiral rollers and chill drums for multi-substrate versatility _____ Machine Features • Unwind Unit with Lift • Web Guide & Splice Table • Teknek Web Cleaner • 8 Flexo Printing Units for optimal color flexibility • Automatic Registration Control ensuring precise alignment • Delam/Relam with Web Turn Bars – enables printing of 2 colors on reverse side • Anti-Static Bars across the web path • 9 GEW UV Dryers providing efficient curing _____ Enhanced Finishing Capabilities • Full Rail System allowing for tool movement along the press • Overlamination/Cold Foil with UV drying for premium effects • Double Die Station: o 1 x K&B Gapmaster Die for advanced control o 1 x Tecnocut Electronically Adjustable Anvil • Dual Web Inspection Cameras (Top & Bottom) • Razor Slitting for precise edge cutting • Waste Matrix Rewind and Product Rewind units _____ Additional Equipment & Accessories • Impression Cylinder Sets (x8): Sizes include 68, 72, 74, 77, 78, 80, 84, 88, 90, 93, 96, 99, 102, 104, 108, 114, 120, 128 • Magnetic Cylinders: Sizes include 136, 144, 148, 154, 160, 168, 176, 180, 93, 96, 99, 102, 104, 114, 120, 128 • 22 Anilox Rolls in various sizes for consistent ink distribution _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Baujahr: 2018, Zustand: neuwertig (gebraucht), PlateExakt 600 - Cliché mounting device/die-cutting cylinder Nedpfxel Ax Uwe Afkolh  Age: 1992  Mounting device  cliché mounting device which is exclusively designed to, the cliché or the die-cutting plate onto the impression or die-cutting cylinder safely, precisely and quickly cylinder. The device has two high-resolution USB cameras that can be moved linearly on a precision guide. precision guide. Synchronised via the centre and individually adjustable by means of a handwheel for different printing widths.  Max. diam.: 227”  Min. diam.: 60”  Width: 620mm

Zustand: gut (gebraucht), Baujahr: 2013, MARK ANDY XP 5000 / 13” – 4-color  Year: 2013  Webwidth: 330mm / 13” Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge Control Nlodpfx Afotubz Uokjh  Control Panel  Lot off Printing./Magneticcylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Zustand: gut (gebraucht), Baujahr: 2006, Funktionsfähigkeit: voll funktionsfähig, Arbeitsbreite: 330 mm, MPS Model: EF 330/8 Year of manufacture: 2006 Printing technology: UV Flexographic Printing Number of printing units: 8 colours Web width: 330 mm class Application: Labels / self-adhesive materials / film applications Condition: Very good operational condition Production status: Currently in daily production _____ PRINTING CONFIGURATION 8 x Flexographic Printing Units The machine is equipped with eight flexographic printing stations and offers a highly flexible production platform for professional label production. Suitable applications include: • Process colour printing • Spot colours • Varnishes • Special coatings • Paper labels • Film labels • Self-adhesive materials • Front-side printing • Reverse-side printing • Multi-process label applications _____ GEW UV DRYING SYSTEM The machine is equipped with a professional GEW UV curing system. The installed GEW UV technology provides reliable curing performance for UV flexographic inks and varnishes and is well established in industrial label production. The dedicated GEW UV power supply units are installed together with the press and form part of the existing production setup. _____ EXTENSIVE INLINE CONFIGURATION Nlodpfxezzym Rs Afkoh This MPS EF 330/8 is not simply a basic 8-colour flexographic press. Its extensive web path and additional inline modules provide a high level of flexibility for demanding label applications. The current configuration includes: • 8 flexographic printing stations • GEW UV curing system • Unwinding and rewinding system • Web cleaning system • Corona treatment system • Web guiding system • Turnbar / reverse-side printing capability • Inline lamination station • Rotary converting / die-cutting section • Longitudinal slitting equipment • Web / print inspection system • Electronic machine control • Extensive exhaust and extraction installation • Safety systems and emergency stops This configuration makes the press suitable for both standard self-adhesive label production and more complex multi-process applications. _____ TURNBAR / REVERSE-SIDE PRINTING A major advantage of this machine is the integrated turnbar and web turning configuration. his allows the material web to be turned during production and enables printing or processing on the reverse side of the substrate. This functionality is particularly useful for: • Backside printing • Multi-layer labels • Peel & reveal constructions • Promotional labels • Technical labels • Special label applications _____ INLINE LAMINATION . _____ WEB & PRINT INSPECTION _____ OPERATIONAL STATUS The machine is: ✓ Fully functional ✓ Currently in daily production ✓ Complete and professionally installed ✓ Available for inspection under production conditions ✓ Supplied with extensive tooling ✓ Suitable for professional label production A production test can be organised by prior appointment. _____ CONDITION Technical Condition ★★★★★☆☆ – 8 / 10 Overall Maintained Condition ★★★★★☆☆ – 8 / 10

Zustand: gut (gebraucht), MARK ANDY XP 5000 / 13”  Year: 2008  Webwidth: 330mm / 13” Equipment:  UNWINDER  7 x FLEXO PRINTING  Add. 1 x WATER COOLING  2 x DIE-CUTTING  LABELSHIFTER  BST CAMERA  UV-DRYER  REWINDER  Web edge Control  Control Panel  Optican for Sheeter  Lot off Printing./Magneticcylinder Nlodpfjtubz Asx Afkoh  Anilox

Baujahr: 2018, Zustand: gut (gebraucht), PRATI NEW SATURN TE 370 Machine type: Inspection / Slitting / Rewinding / Die-Cutting Machine Working width: max. 370 mm Maximum material width: 390 mm Minimum material width: 80 mm Maximum speed: up to 300 m/min, depending on material Electrical connection: 3 x 400 V + N / 50 Hz Compressed air: 6 bar constant _____ UNWINDING SYSTEM The machine is equipped with a professional servo-controlled unwinding system including: • Pneumatic fixed unwinding shaft Ø 76 mm • Brushless servo motor • Maximum unwind roll diameter 850 mm • Automatic roll-end detection with machine deceleration and stop • Electronic web tension control • Closed-loop tension control via dancer roller • Movable splice table with pneumatic clamps The closed-loop system ensures stable web tension even during acceleration and deceleration. _____ WEB GUIDING BST Web Guiding System • Electronic web edge control • Ultrasonic sensor • Suitable also for transparent materials • Professional BST web guiding system Important: The BST TubeScan camera inspection system is NOT included in the machine. _____ INSPECTION / CORRECTION AREA The machine offers a dedicated working area for operator inspection and correction of defective material. • Inspection / correction table • Working area length approx. 655 mm • Forward and reverse operation This allows the operator to identify and correct defective sections before rewinding the finished roll. _____ MAIN DRIVE The PRATI SATURN uses modern servo technology for precise material handling: • Brushless servo drive • Electronic speed control • Electronic position and torque control • Specially coated pull roller • Pneumatic pressure roller • Controlled web acceleration and deceleration • Forward and reverse operation The system is designed to minimise material slippage and maintain accurate web transport during production. _____ SLITTING UNIT Professional slitting equipment including: • Removable knife shaft cassette • Removable upper knife shaft • Minimum slitting width approx. 13 mm • Upper and lower knives • Pneumatically controlled pressure roller after the slitting section _____ DIE-CUTTING CAPABILITY The machine configuration provides a professional platform for rotary die-cutting applications. According to the original machine specification: • Maximum die-cutting material width: 450 mm Nledpfx Afez Ea Iteksh • Standard die size up to 14.5" • Minimum die size 12" • Matrix waste rewinding capability • Maximum matrix waste roll diameter ap

Zustand: neuwertig (gebraucht), Baujahr: 2024, Funktionsfähigkeit: voll funktionsfähig, Mark Andy Digital Pro3 PLUS Hybrid Digital Printing Machine with Semi-Rotary Die-Cutting Unit Installation: April 2024 Running meters: approx. 96,000 lfm from April 2024 to April 2026 Web width: 330 mm Digital print width: max. 318 mm Flexo print width: max. 330 mm Njdey Ul I Aspfx Afkslh Digital resolution: 1200 x 1200 dpi Digital printing speed: approx. 23.5 m/min Digital printing: 4 colors Flexo printing: 2 flexo units Flexo drying: air-cooled LED UV Materials: BOPP, PET, PP, paper Digital Front End / RIP: PDF workflow Power supply: 240 V, 50–60 Hz Configuration and equipment: Mark Andy Digital Pro3 PLUS hybrid digital press 2 flexo printing units Semi-rotary die-cutting unit Latest generation flexo printing stations Semi-rotary die-cutting, expandable Unwinder for laminate / KP available Bypass for “flexo only” production or blank labels available Rewinding system Air-cooled LED UV drying PDF digital workflow Suitable for roll-to-roll label production Accessories included: 2 x printing cylinders: 80Z and 96Z 1 x Spilker Airboy Further accessories according to final confirmation Technical highlights: The machine offers a strong combination of digital printing, flexographic printing and semi-rotary die-cutting in one compact production line. The uploaded technical specification confirms a maximum web width of 330 mm, a digital print width of 318 mm, 1200 x 1200 dpi resolution and digital production speed of 23.5 m/min. The layout drawing shows a complete production concept with unwind, semi-rotary die-cutting section, print station, digital engine and rewind system, making the machine suitable for efficient short-run and medium-run label production.

Baujahr: 2016, Zustand: gut (gebraucht), CMC PROFI-LINE R-320 Rotary / Semi-Rotary Label Die-Cutting & Finishing Machine 320 mm | Servo Technology | Register Die-Cutting | Rewinding | Professional Label Finishing Dear Sir or Madam, we are pleased to offer the following CMC PROFI-LINE R-320, a professional rotary die-cutting and label finishing machine designed for the converting of self-adhesive labels and narrow-web materials. The machine was manufactured in 2016 and offers a compact but highly functional configuration for professional label production. With a working width in the 320 mm class, servo-controlled web transport, register-controlled die-cutting and several winding positions, the machine represents an attractive solution for label converters looking for a flexible finishing system for digitally or conventionally printed label material. The machine is currently installed and can be inspected by prior appointment. _____ MACHINE DETAILS Manufacturer: CMC Maschinenbau GmbH Model: PROFI-LINE R-320 Machine type: Rotary Die-Cutting / Label Finishing Machine Year: 2016 Machine No.: 100 586 Working width: approx. 320 mm class Electrical supply: 400 V Frequency: 50 Hz Installed power: 20.5 kW Maximum machine speed according to machine plate: 90 m/min Machine weight: approx. 1,800 kg CE marked _____ DIE-CUTTING SYSTEM The machine is equipped with a professional rotary die-cutting section suitable for the finishing of printed self-adhesive label materials. Visible equipment includes: • Rotary die-cutting station • Magnetic cylinder system • Counter-pressure cylinder • Adjustable die pressure • Heavy-duty die-cutting frame • Servo-controlled material transport • Register-controlled production • Suitable for printed label webs • Matrix / waste separation The machine is particularly suitable for the finishing of digitally printed labels where precise die-cutting registration is required. _____ REGISTER CONTROL The machine is equipped for register-controlled operation, allowing the die-cutting process to follow pre-printed material. This makes the machine suitable for: • Digital label production • Flexographically printed labels • Pre-printed self-adhesive materials • Short- and medium-run label finishing The servo-controlled system helps maintain stable web positioning during production. _____ WEB HANDLING The machine is equipped with an extensive web path and several web-handling components. Visible on the machine: • Electronic web guiding system • Web guide sensor • Multiple guide rollers • Controlled material feed • Adjustable web tension • Pneumatic shafts • Several rewinding / waste winding positions The web guiding system contributes to precise material alignment before and during the die-cutting process. _____ Nlsdpfx Afoz Ea N Reksh UNWINDING The machine includes a professional unwind section for roll-fed production. Features visible on the machine include: • Pneumatic unwind shaft • Roll-fed material handling • Controlled web tension • Adjustable web path • Material guiding system The machine is suitable for typical labelstock, paper and film-based self-adhesive materials. _____ REWINDING

Zustand: gut (gebraucht), Baujahr: 2019, Funktionsfähigkeit: voll funktionsfähig, Manufacturer: Grafisk Maskinfabrik A/S, Denmark Model: GM DC330 V8-BX Designation: Converting Line Year of manufacture: 2019 Material width: 333 mm Max. speed: approx. 50 m/min Voltage: 3 x 400 V + N + PE Max. load: 32 A Frequency: 50/60 Hz CE conformity: Yes Location: Germany Availability: End of September 2026 Main configuration: • Unwinding unit, 3" core / 76 mm • Web guiding system • Flexo printing / varnishing unit • Lamination unit • Cold foil application • GEW UV curing unit • Pre-heating unit for toner / reduction of toner cracking Nedjzkarropfx Afkolh • Semi-rotary die-cutting unit with Kocher & Beck GAP function • Approx. 25" magnetic cylinder system, usable format approx. 22" • Matrix rewinding • Back scoring • Slitting unit with shear knives • Two rewinding shafts, 3" • Touchscreen control • Suitable for offline roll-to-roll production Additional equipment: GM Buffer • Condition: Visual condition: 8/10 Technical condition: 8/10 The machine is currently still in operation and can be inspected under power. According to the available photos and information, the machine appears to be in good, clean and well-maintained condition. Final technical inspection and test run are recommended before purchase.

Baujahr: 2008, Zustand: gut (gebraucht), KARVILLE Tornado 2500 – overhauled in 2020! Year of Manufacture: 2008 _____ Machine Specifications and Equipment: Tornado - Electric Tunnel The newest addition to our product line, the tornado tunnel is an electric shrinking system ideal for use on steam sensitive applications. With the capability to create a superior shrink appearance similar to steam tunnels on almost any container shape, this tunnel generates a compact solution to applications where high quality shrinking is required and the use of steam is not acceptable. The Tornado provides the best solution for:  Shrinking for Difficult Shaped Containers  Shrinking for Water Sensitive Products  Shrinking for Heat Sensitive Containers like PET  Eliminating After-Shrink Wrinkles  Saving Energy - High Efficiency Design  Saving Space - No Need for Extra Leister Guns and Special Rotation Systems  Minimizing Mechanical Maintenance - Simple Machine Structure  Eliminating the need for Steam Boiler and Infrastructure. Nlsdpfovxkatox Afkoh This is Ideal for Blow Molders, Contract Packers and Thermo formers. _____ Accessories Included:  Manuals  Keyes  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Baujahr: 2019, Zustand: gut (gebraucht), LEMORAU MEBR+ 400 Digital Label Finishing & Die-Cutting Machine -400 mm | Full Rotary & Semi-Rotary | Flexo Varnishing | Turret Rewinding | Approx. 700 Die Sheets Semi-rotary operation provides excellent flexibility for short runs and frequent job changes, while full rotary production allows considerably higher speeds for longer production runs. This particular machine offers a very comprehensive configuration including two rotary flexographic spot-varnish units, corona treatment, web cleaning, turret rewinding and the high-speed semi-rotary Speed Pack. An additional highlight is the extensive tooling package with approximately 700 die sheets, representing significant additional value for the future owner. _____ MACHINE DETAILS Manufacturer: LEMORAU Model: MEBR+ 400 Year: 2019 Machine type: Digital Label Finishing & Die-Cutting Machine Maximum web width: 400 mm / 16" Operation: Full Rotary & Semi-Rotary Application: Digital and conventionally printed labels / self-adhesive materials _____ PRODUCTION SPEED Full Rotary Mode • Maximum speed for blank labels: 200 m/min • Maximum die-cutting speed to register: 120 m/min Semi-Rotary Mode • Standard semi-rotary speed: up to 40 m/min, depending on die / repeat • Equipped with Speed Pack • Semi-rotary production speed up to approximately 80 m/min, depending on application and tooling This combination makes the machine suitable for both short-run digital finishing and considerably longer production runs. _____ DIE-CUTTING SYSTEM The MEBR+ combines rotary and semi-rotary die-cutting within one machine. Rotary Die Repeats 203.20 – 431.80 mm / 8 – 17" Semi-Rotary Die Repeats 41.30 – 371.00 mm / 1.6 – 14.6" The semi-rotary system significantly reduces tooling requirements for shorter jobs while full rotary operation provides higher productivity for longer runs. Tooling Included A particularly important advantage of this machine is the extensive tooling package: Approx. 700 die sheets included This represents a considerable additional value and can substantially reduce future tooling investment. _____ 2 x FLEXOGRAPHIC SPOT VARNISH UNITS The machine is equipped with: 2 x Rotary Flexographic Spot Varnish Units Suitable for: • Spot varnishing • Protective coatings • Decorative varnishes • Special label finishing applications • Additional surface enhancement The flexographic units considerably increase the versatility of the machine and allow additional finishing operations to be integrated directly into the production process. _____ CORONA TREATMENT The machine is equipped with a corona treatment system, providing improved surface treatment for demanding substrates. Particularly useful for: • Film materials • Synthetic substrates • Improved coating adhesion • Improved varnish adhesion _____ WEB CLEANING SYSTEM Integrated web cleaner for removing dust and contamination from the material before further processing. Nljdpoz Ea I Tefx Afkeh This can contribute to improved finishing quality and more consistent production results. _____ WEB GUIDING & TENSION CONTROL The MEBR+ offers sophisticated web handling techn

Zustand: gut (gebraucht), Baujahr: 2014, • 10 Flexographic Printing Units • 4 Rotary Screen Printing Units • Cold Foil • Lamination Nedpfx Afez Nf D Aokjlh • Rotary Die-Cutting • GEW UV Curing • Corona Treatment • Double-Sided Web Cleaning • Advanced Web Inspection • Professional Anti-Static Equipment

Baujahr: 2006, Zustand: neuwertig (gebraucht), CODIMAG VIVA 340 Age: 2006 Unwinder Camera 12” and 14” IST UV dryer 5 x Letterpress 1 x Varnish Unit All 5 backpressure cylinder are new in 2021. Neue Rullers Flexo UV Varnish Unit Rotary Unit with Magnetic-Cylinder and more than 1000 Magentic cutting plates Nedpfxshhfibs Afkjlh GAP-Master Rewinder Complete service history by CODIMAG In Germany , in production

Baujahr: 2007, Zustand: gut (gebraucht), Funktionsfähigkeit: voll funktionsfähig, Printing and Coating • 5 letterpress printing units Nledpfx Afoztqlzeksh • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, barcodes, screens and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable and controlled web transport throughout the complete production process Laminating and Converting • Inline laminating unit • Suitable for the production of laminated and multilayer labels • Laminating section can be used independently • Separate operation possible together with one printing unit • Machine can therefore also be used as a dedicated converting and finishing line Die-Cutting and Finishing • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability • Flexible processing of different label formats and repeat lengths Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control • Reduction of production waste and defective material _____ WHY THIS VIVA CODIMAG 340? • High-Quality Letterpress Printing The letterpress printing process provides sharp text, clean lines, strong colour coverage and precise reproduction of small details. This makes the machine especially suitable for self-adhesive labels, pharmaceutical labels, cosmetic labels, food labels, barcode applications and other demanding narrow-web products. • Five Printing Units Plus Varnishing The machine is equipped with five letterpress printing units and one separate varnishing unit. This configuration allows multicolour labels to be printed and subsequently protected or visually enhanced with a varnish in one continuous production process. • Independent Converting Capability One of the most important advantages of this machine is the flexible configuration of the laminating and converting section. This section can be operated separately together with one printing unit, allowing the machine to be used as a dedicated converting line for: • Laminating • Varnishing • Die-cutting • Slitting • Perforating • Rewinding This provides additional production capacity even when the complete printing section is not required. • Inline Laminating Unit The integrated laminating unit enables the production of protected, multilayer or enhanced label products. Laminating increases the durability of the finished label and can improve resistance against moisture, chemicals, abrasion and mechanical stress. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit provides flexibility for different label formats and repeat lengths. It is particularly suitable for short and medium production runs where frequent job changes and flexible format handling are important. • Complete Inline Production Printing, varnishing, laminating, die-cutting, perforating, slitting and rewinding can be completed within one production line. This reduces material handling, minimises intermediate production stages and improves overall production efficiency. • UV Drying Technology The UV drying system enables immediate curing of inks and varnishes. This supports high-quality production, stable print results and direct further processing of the printed material within the machine.

Zustand: gebraucht, Baujahr: 2007, Format: 920 mm Ausstattung: Lufttisch Programm Nljdpfx Afj Afn Ihjkjh 3x extra blades

Baujahr: 2000, Zustand: neuwertig (gebraucht), Gallus TCS 250 Age: 2000 Available: Immediately Size : 254 mm - Size Length ;max.: 254 mm; min.: 101.6 mm - Stock: Paper:100 to 180 g/m² Cardboard: up to 300 g/m² , max. 0.3 mm Thickness - 2 Letter Printing Units - 1 Flexo Printing Unit - 3 UV Drying Units Type Uviterno - KB Rotary Die Cutting Unit - Magnetic Cylinders: Z72,74,76,78,80,84,88,92,96,100,104,108,112,116,120,124 - Unwinder with Roll Diameter 1.040 mm - Web and Side Trimming Unit - Webguide Nlodsgy H Axopfx Afkeh - Rewinder with max. roll diameter 300mm - Speed up to 11.000 printings / h - Touch Screen

Baujahr: 1998, Zustand: gut (gebraucht), ROTOFLEX R 1300 Slitter / Rewinder Nodpfx Ajq T Schefkslh Specifications:  Age: 1997  Width : 13" (330mm)  Unwind shaft diameter: 76mm  Rewind shaft diameter: 76mm, 50mm, 40mm  Location : Germany Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 8/10 (cleaned and can go to end-user directly)